Replica Watches Store News

Friday 05 October, 2018 | RSS Feed

Replica Watch Maintenance Editing Maintenance Tips

by Administrator | post a comment

High-end replica watches are recommended to be maintained every two to three years, replace waterproof components, check travel performance and movement power consumption, clean movement, and maintain appearance, etc., such maintenance services will effectively extend your time. the use of replica watches.
(1) You should not wear the same replica watch every day. You must prepare several different replica watches to be used interchangeably. Besides enriching your personal style, you can also avoid dust and body scale. Focus on the same replica. On the watch. For leather straps, it is more important to start, so as not to use ordinary clothes and ropes. Even if the surface is new, replica watches will look very old.
(2) Do not place a replica watch on an amplifier, stereo, TV or computer to avoid magnetization.
(3) Do not open the watch's back cover at will, preventing dust from entering the movement and affecting the normal operation of the replica watch.
(4) Do not place a replica watch in a wardrobe with camphor to avoid oil damage.
(5) When wearing a replica watch, sweat on the hand becomes corrosive to the casing. Steel casings are made of nickel-chromium alloy, which has better corrosion resistance. The semi-steel case is copper, which is connected to sweat for a long time. It's easy to corrode. Always use a soft cloth to wipe sweat or wear a plastic watch to prevent it from being attacked by sweat.
(6) The table has been refurbished. After a replica watch is marked with many lines, you can drop one or two drops of water onto the watch, then squeeze a little toothpaste to remove scratches and make the watch look new.
(7) Ordinary mechanical replica watches are wet, can be pressed on a replica clock with dry cotton, and then baked with a 40-watt light bulb for 5 minutes, moisture in the watch can be evaporated. If the quartz electronic quartz clock is wet, take a few small pieces of calcium chloride and wrap it in gauze; then open the electronic clock cover and place the wrapped calcium chloride and electronic watches together in an airtight plastic bag. Or inside a glass bottle, sealed. Generally, moisture can be removed in about 3 hours, so the electronic clock returns to normal. For tables with high humidity, water absorption time can be extended properly.
(8) Put a replica watch on your wrist and sleep. If a replica watch is a luminous clock, it will have an adverse effect on the body. This is because the luminous table lamps and luminescent material coated on the dial are mainly a mixture of radium and zinc sulfide. Radiation emitted by radium can stimulate zinc sulfide crystals. When sleeping, if the clock is worn, the body will be affected. Eight to nine hours of radium radiation are harmful to humans and the body. Therefore, before going to bed, you should take a luminous table and place it on the table.
(9) When you receive your beloved replica watch, when you remove the outer packaging, you must save the box to watch the protective replica. These boxes to protect replica watches can provide the safest protection for replica watches when they are not worn properly, avoid duplicate watches being damaged or hit, so it is really necessary to keep boxes, and it is recommended that if you do not Don't wear replica watches on weekdays, you can get into the box and you can greatly reduce the possibility of damage to replica watches.
(10) For long-term storage of unused replica watches, hours must be issued once a month. Replication of automatic movements must be placed back and forth gently. Move for a few minutes or wear on the wrist for a period of time to tighten it automatically. Clockwork. The parts are not stored in a static state for a long time to ensure performance runs from hours.






News archive